Auto Racing Questions and Answers
What brand flat top pistons are best for dirt oval track use.?
Answers:
all the brands these guys are giving you are great but doesn`t matter what brand you go near make sure they are forged handle way more horsepower i drag see and abuse the hell i hold diamond pistons paid right around 900 bucks for them cannot vanquish these pistons ive pre ignited on pump gas adjectives that burnt the tips sour spark plugs does not phase these pistons
SRP. they are just as devout if not better than adjectives the $$$$ brands. i used them in my dirt track vehicle and never had a problem. they come highly suggested from heaps of the local engine buliders in my town. i use kieth black pistons surrounded by my asphalt car and they held up in good health thru 2 seasons. they are much cheaper but the dirt tend to have greater hores power motors pushing more rpms. if your going over 450hp spend the money on a good set or you may blow the motor and hold to spend even more to build a new one.
We used KB pistons . they be flat top for a wissota dirt car. we also used an ultradyne cam, competition cams own the grinds that be ultradyne.I also was a tech inspector for our local track.
Most of the front runners have KB pistons.
Wiseco, je srp, ross if you want quality! you could turn with th kb s but the are a lower trait piston.
if you want the best, go beside J&E. or Keith Black.
Motocross tracks surrounded by london?
Question:hey people,mabe this site is not for this compassionate of questions but anyways, does anyone know any motocross or supercross tracks within london, i mean surrounded by london, or really near the out-side of london?? if anyone know please tell me the label of the track and where it is and adjectives that..
Mx forever!:P
Answers:
nope sorry
there is 1 within in the put a bet on of picadly,when u get near ask arund
Which race make iron race cylinder head are best for small block Chevrolet Engines?
Question:If you had your choice between Dart Platinum, Racing Head Service, World Products or EQ, which one would you choose for oval track race only. What are the best reason to deck them (a) 23 degrees save for rocker arm geometry and a straighter intake shot to the intake valves.
Answers:
It adjectives depends on what the valve rules are for the class you are running.If you canot run a 2.02 i suggest any a 411x, or a 993 head. in a minute, if angle plug heads are trial, i guggest any vortec type head.I see that you are asking in the region of engines for dirt track, what type of car are you building?Some those angle mill them like that for reducing the cc's contained by each cylinder port. as you would expect, less cc's more compression. some classes cannot run 6" rods so anything you can do for an assistance.
WORLD PRODUCTS MAKE A DECENT HEAD FOR REASONABLE MONEY. DARTS ARE OVERRATTED. ME PERSONALY I USE A BOW-TIE 041 THEY FLOW GREAT AND HOLD UP TO THE BIG BUCK HEADS.
I've always be partial to the time honored Chevrolet 365hp fuel injection heads (if you can find them) or the angle plug head with the 2.02 valve.
www.powerheads.com may be of some help, they can do ANY head
How do you remove the Engine RPM limiter on a 95 Chevy Cavalier?
Question:I am not looking to remove the vehicle speed limiter, I want to remove the Engine RPM limiter. These are 2 different items. This car is used for circle track race in an entry smooth class.
It hits the REV limiter at the end of the straight stretch. Changing gears at the bring to a close of the straight strech is not an option. Changing gear ratio is not an substitute.
It has the untested computer, ignition, and fuel injection. This class has a claim rule so I don't want to spend abundantly of money on modifications. Don't want to replace the computer or the chip.
Answers:
its impossible (technically) without replacing the computer because it is electronically controlled
If you don't know how likelihood are you don't need to you will extremity up blowing your engine and it sounds to me like you don't want to buy anything or replace anything so for you it will be impossible
Resolved Questions