Cycling Questions and Answers
How can I tighten my bike's crank after I put Slick50 surrounded by it?
Question:A week ago, I found myself at a loss for some good-old DW-40, and grabbed some Slick50 to stop the horrible echo coming from my crank case. The perfect news is, my bike is as sightlent as the night's sky; the doomed to failure news is that after 4 miles or so, I own to stop and tighten my crank, one the left side, beside an 8mm hex key. Is within anything I can do to tighten my crank, so it can stay put once and for all?
Answers:
Your crank and associated bottom bracket may be starting to show signs of downfall. Over time, the joints on your crank may loosen preventing you from tightening it. Also WD-40 and Slick50 are products that should never be used on a bike, they will in fact cause more problems contained by the long run. There are plenty of greases and lubricants out there that are specifically manufactured for bikes. Go to a bike-specific shop and own them take a look at your bike.
Use Lock Tite on the threads.
Get som' TRUE crankizzle and forget about it. (drugs)
you can put slick 50/wd 40 on it adjectives day long-but the bottom string is if your crank is making noises it shouldn't consequently it needs replacing-for the time self take apart the crank verbs the components coat lightly near a light grease (mineral based) and re-assemble. take perfectionism not to over-tighten the crank as this can result in injure.
If your bike lives on WD-40 and Slick 50, it's probably not worth more than $20. WD-40 is NOT lubricant, and a real bike shop mechanic can hook you up next to a clean drivetrain and actual bicycle lubricant.
tighten that bolt near all you get
Bike frame?
Question:im looking 4 a light counterweight bbike fram witch one should i get please let somebody know me the price
Answers:
First of all stay away from steel frames, they are usually the heaviest.
If you're newly looking for a nice frame for fun, but not seriuos riding there are categorically light aluminum frames out at hand. Trek Alpha Aluminum frames are relatively light. Aluminum frames can span from sub-$100 to a couple hundred.
Ofcourse carbon fiber is the next step up and is lighter than aluminum frames. Some those don't like the flexing issues of a carbon fiber, you may want to keep watch on out for it. Carbon Fiber frames can range from a couple hundred to the thousands.
What tops adjectives the frames of any material would be a nice titanium frame. A latest one would generally cost over a thousand. You can find a used one for cheaper than a carbon fiber and it would combine the lightweight properties of carbon fiber (if not lighter) with a steadier ride. Older used ones can be have for $500 even if you look for them at the right places.
I would recomend a carbon fibre frame, it doesn't weigh much at adjectives, but it costs more. If you want a road bike I would recomend the LeMond Versailles double crank, it costs about $2000, but it's worth it. Aluminum aloy is cheaper, but heavier.
fuji carbon fiber is extremely lightweight 15lb total bike
How much are you feeling like to spend? The sky is the limit surrounded by the bike business. How about the Cervelo Soloist Carbon SL which retails for $4,500. The frame looks sick and its back up by the team CSC. But be honest beside yourself; Are you setting your eyes on the proper scale?
http://www.competitivecyclist.com/za/ccy...
I suggest you do a query for Bob Jackson Cycles. Jackson has be building frames since 1935 and they are among the finest available.
They have a range of models that start at about $800 including a fork. Plus, you can choose your geometry, color and paint plot at no extra charge.
All this being said, you should remember that abiding 1 ounce (28g) from each gearstick is the same as positive 1 pound (450g) from the frame as far as performance benefits. Rotating mass is your opponent, so the more you can save on the wheel (especially tires, rims, and spokes in that order) the better your bike will execute.
Which bike size is right?
Question:My girlfriend is just looking for something for a few months to ride to and from Uni. I read that a rule for height was to use your inside leg length, take rotten 2inches for a mountain bike, then a further 9... she have a 30.5 inch inside leg and was thinking this would this be the
http://www.halfords.com/webapp/wcs/store...
do you judge it's right? or should she be looking for a different size? thanks so much!
Answers:
There are like mad of different sized frames on the market. Just to create life difficult, different manufacture use different methods to measure them.
In this casing the 19.5 "would be a centre to top measurement(c-t)
(centre of bottom bracket(pedal crank) to top of the frame at seatpost)
Any piece close to this will fit her. Manufactures usually step their frames in around 1"-1.5" increments. If they don't have one in half an inch of the 19.5 afterwards;
If she is proportionally shorter in the leg travel for the size above. If she has lovely long legs run the one below.
There is plenty of adjustment in the form post to match up leg length. The larger frame will also be longer to the pedal bars. This suits society with a longer trunk division.
The seat distance from the ground should be adjusted so that the leg can be basically straightened with the ankle bent (toes up). If the pelvis rocks the form is to high. Make sure she have a ladies Saddle (their pelvic bones are wider)
Handle bars can be somewhere she wants for comfort or speed.
To clarify we are discussion standard road bike hear. Probably the best choice to ride to and from uni.
Mountain bike geometry is much different,
Generally, when your pedal is at the bottom of the downstroke, your knee should be slightly bent. Any virtuous bike shop in your nouns will be able to give support to you with no trouble.
Your width is wrong. That sounds more like a crude form height setting. You should look at wrenchscience and bear a few measurements to find her perfect fit.
Go to http://www.wrenchscience.com/store.aspx?... and choose "fit system" from the top. Go ahead and register- they don't mess beside your info and I have NEVER be put on a spam list from them.
Go beside her to a pecialized store. Different kind of bikes and different brands enjoy different frames. A rule lf thumb is that there should be give or take a few 4 inches between the top tube of the frame and the crotch when standing in the bike near ur feet on the ground. Nevertheless as i told u different bikes will own a different frame shape so it will change, so step to ta specialized strre pick one andask the people in that the best size and TRY the bike. I'm 1.71m tall and ride a 17 inch mtb.
if you're measure her in stocking foot from the floor to where a 1.5" glutinous book snugged up good surrounded by to her crotch then - 30.5" =
road frame size is 51cm or small - maybe extra small
seat height above sea level from center of crank bolt to top of saddle cradle is 68.4cm
I would be careful when select a bicycle for your girlfriend. The old rule of standover echelon is highly vague given the modern changes within frame geometry (top tubes that run on an angle, as opposed to horizontal) It is far more historic that the reach to the handlebar(she should know how to reach it slickly and have a meek bend in the elbows minus hunching her back), and the height of the handlebar within relation to the seat height above sea level (generally unless you are racing, your hand should be higher than your seat) are comfortable for her. The best method to determine this is to have her sit on several bikes, and choose the best one. I am 5'4" towering and I ride about a 50cm road bike. I hope you find this handy.
The general rule of thumb for a right sizing is that when straddling the bike near both feet on the ground that your crotch should be at least possible one inch above the tube(bar that runs from your handlebars to your seat). Now a woman's bike usually has a sloping tube from the bar to the seat, so what she should do is run to wal-mart or wherever and sit on a few guys mountain bikes 22, 24 26" etc. and see which one is the closest to anyone 1" away from her, crotch. then budge with alike size bike in a woman's model. Adjustments can be made to the bike so that her knees are slightly bent on the downward stroke of the pedal, adjust the bar so that the spine is tilted forward but in a comfortable position when sitting on the form and holding the handgrips. Feel free to ask any more questions.
B m x bike doomed to failure dependence is the pet name?
Question:BLACK AND GOLD IN COLOUR
Answers:
I don't understand this interview but I would like to embezzle this opportunity to tell everyone that I approaching to eat beans
indeed
Are you looking for it? Try lost and found at the Police Station
yea i wouldnt bring it
go near the bad quirk bike its great
Resolved Questions