Cycling Questions and Answers
How fragile are different bicycle frame materials, especially cannondale?
Question:I'm looking to buy a new bicycle, i come up with i'm going to get a cannondale and i've be researching frames and my options are aluminum, carbon, or alloy. It will be a road bike and everywhere i read i find warning saying how fragile these bikes are, in particular the carbon and aluminum, that if the drop or anything it might dent or crack. I don't race a undamaged lot but i want something that i can have for a while but will also be incredibly comfortable riding for long periods of time. Does anyone enjoy good suggestion or experience with these frames and can report me if these are huge factors that I should verbs about or are the warning just because it have happened a few times.
Answers:
"Alloy" could apply to aluminium, steel, titanium, or any other combination of metals. No biggie.
In the unadulterated world, a quality bike made from any of the above will hold up fine to several years of easier said than done riding, as long as you take proper nurture not to squish it, crunch it, bend it, crash it, or otherwise to anything but ride it.
Carbon gets griped on because if proper exactness isn't take, small cracks can develop that head to big problems, or the tubes can be crushed in a clamp or by bang hard into something (like when handlebars beat around in a crash)
Aluminum get damaged when it's bent at adjectives - like surrounded by a crash, it doesn't take ably to bending and unbending.
Steel and Ti are more resilient, but can also draw from beat up.
i own a giant ocr3 for about a year presently and nothing is wrong near it i've had some falls and nought damaging the bike. cannondales are righteous strong bikes. i would go next to a giant or a cannondale.
Carbon frames are more fragile than aluminum or steel frames, but when it comes to everyday riding, you shouldn't worry going on for denting or cracking your frame. Some carbon frames may have a immensity limit so if you are a clydesdale rider (200+ lbs) you may want to do some research into the specific frame to see if to be exact an issue. Most if not adjectives the major manufacturer provide a lifetime warranty on the frame so if you do damage it, clean frame!
That is a great question. I enjoy rarely ever see a steel or aluminum frame run into trouble any only witnessed not many carbon fiber frames run into trouble. I personally don't resembling carbon fiber's ride. It feels to "spongy" to me. But that may only just be me and how I ride.
I would look STRONGLY at Cannondale's financial situation before I would buy their product and maintain it for a while.
I have broken the backside chainstays off of one, and dented the toptube next to my knee from a MILD crash.
I use to see on Cannondales exclusively - but, if it were my money, I would look at something else!
Magnesium by the track, is EXTREMELY CORROSIVE and does NOT weather well at adjectives - realistic three year lifespan! - read here:
http://www.magnesium.com/w3/forum/read.p...
Pound for pound Aluminum is stronger than steal - read here:
http://www.sheldonbrown.com/frame-materi...
As far as aluminum frames are concerned, Cannondale have a well-deserved reputation fro making solid, strong and light bikes. I've see a few catastrophic failures on aluminum frames but never a Cannondale. The worst I've see on a C-dale is a dented tube (think beer can, just stronger). Aluminum C-dales are foot made in USA so feature is not an issue. Even the rough ride of aluminum has be minimized.
If you want a bike that is not easy to damage, steel is the style to go although in that are some superlight steels that have cracked walls that dent easily.
If you want indestructible, titanium is the lone choice. Heard many stories of see crashes involving badly hurt riders and intact titanium frames. Nice ride too.
Well, I hold friends that have ridden Cannondales and I don't hear great things give or take a few them. I've heard the term CRACK N' FALE used many times. But I really can't influence myself cause I haven't ridden one, not to enunciate I wouldn't. They look like really nice frames, especially the Six13.
Maybe that's why they guarantee their frames for time??
I'm not big on titanium. It flexes more than steel.
Steel is the most durable. If you bend steel, then you can bend it final with little loss of strength. If you bend aluminum or titanium, you own a problem. Both metals are stronger than steel, but they are far less durable when diluted. And, carbon fiber cannot be repaired if damaged.
It is other a tradeoff between materials of construction (btw, brand has zilch to do with this - Cannondale, Giant, Lemond, etc. will label bikes from different materials). Steel can be a more springy ride, and Aluminum and titanium can be harsher. But, it also depends on wall thickness of the tubing and how the tubes are coupled to characterize the ride.
I suggest riding a few bikes and determine for yourself what you like. I doubt you will own major problems beside aluminum. If you have lots of disposable income, you might risk carbon fiber.
Your best friend (above) is a power-driven engineer?! I hope I never enjoy to rely on anything he designs.
In fairness, I think he mechanism that aluminum is stiffer than the other materials, not stronger. As a general rule, aluminum is 1/2 the solidity of steel but only 1/3 the strength.
Of the materials you mention, steel is by far the strongest, later comes titanium, then aluminum, afterwards carbon fiber WHEN IT COMES TO A BICYCLE FRAME... but I have another suggestion at the finale...
I was on a Cannondale when a sudden catastrophic flop occured and would never recommend any aluminum frame to anyone.
Titanium is a very well brought-up frame material if you can attain past the cost. It have a very low hollow out memory, so dents really don't affect it too much. There are widely varying qualities of Ti fraames and I haven't all the same been competent to determine a way to right away tell angelic from better from best.
Hi zoot carbon fiber frames tend to be well thought out, but they are undermined relatively easily. If a fiber is compromised later the strength in that nouns is as well. Also, carbon ages. The "glue" that holds it together become fatigued with use and the structure become slowly unstable.
I ride steel frames so I'll keep my assessment out of this.
Now, my suggestion... think just about a magnesium frame. Superlight and extremely strong. Once I get tired of steel I'll probably stir to magnesium. Do a search for Paketa bicycles.
I found this ebay guide on Bicycles exceptionally interesting.
What's bright beside joe friel's triathlete's training bible 2nd edition?
Question:comparison with 1st edition
Answers:
More than plausible some updated pictures and few updates to keep within with the times. New diets since in that have be so many change since the first edition.
I would look at a version at borders and compare to the first edition if you own it.
Sometimes a 2nd edition will trigger people to run out and buy it even though there are not that masses changes. It is adjectives about the benjamins
man I enjoy no idea
Where can I buy leather leg shields for riding motorcycles?
Question:Can any of you bikers out there describe me where I can buy leather leg shields for riding motorcycles? They nice of look like boots, but in need the foot part. I enjoy looked on several leather sites on the internet, but still can't find them. Please let me know if you know of a website I can find them. Thanks...
Answers:
Chaplady(a)horsefeathersltd.com
Yes..They are call Chaps..
The ones you are looking for
are called, Half Chaps.
Custom made to fit..$140.00
Nancy Hollander...Owner
I deduce what your looking for are called chap
first, post your question within the proper category
this is Cycling, as in Bicycling
try Motorcycles
and be in motion to your local dirtbike/offroad store, they will have body armor to market you (Fox is a good brand name)
What is the best hybrid for around $1000?
Question:I am going to buy a hybrid some time in the subsequent two weeks. I am thinking of the Specialized Sirrus Comp or Sport the Trek FX 7.6 or the Gary Fisher Mendota, but I am open to other suggestions. Does anyone own any good concept? I have smaller number then $1000 to spend possibly a tad more if there are noticable differences. I use it for comuting but definatly will walk on long rides on the weekends.
Answers:
I'd say forget a hybrid if you would close to to go on longer rides. The foot position offered by a flat bar is fixed. You will find that it can be tiresome and you'll possibly get ache related to having just one hand position. You would be better sour with a regular road bike near a drop bar but one beside a more upright position to mimic the position on a hybrid.
http://www.specialized.com/bc/sbcbkmodel...
http://www.cannondale.com/bikes/06/cusa/...
http://www.giant-bicycles.com/en-us/bike...
http://www.jamisbikes.com/usa/bikes/07_b...
http://www.schwinnbike.com/products/bike...
I work at the local shop, we take fishers and treks. I like the trek 7600, it comes beside great components, xt stuff. Its a great bike and the bare metal finish next to the clear looks good. Ive assembled a few of them and nearby very nice bikes, probally the untouchable end hybrid ive ever deal with.Ive one and only built 1 fisher mendota, its a 700c or 29er right. Im not very sure on the components, but from what I remember it have disc brakes. I cant say ive worked on alot of specialzeds, a few. There nice bikes. Personally if it be me I would go next to the fisher becouse I have have more luck with thier bikes and they seem to be to be better built for some reason. Dont draw from me wrong the Treak is a great bike, but I think you should consider the fisher over them. I hope I heled, suitable luck with the purchase!
adjectives of the bikes you mention are pretty good
but I prefer the Specialized (very durable and sturdy)
your price variety is good, so you hold options
I one-sidedly like the lineup from KHS. They tend to enjoy a better quality build and 1 or 2 steps high grade components than Trek, Gary Fisher (same as Trek near a different name) or Specialized.
Grab a Kona Jake the Snake----its TOUGH! ( www.ebay.com---click Sporting Goods---then SEARCH 'Hybrid bikes' ---you'll find COOL rigs with wonderful price tag! )----Enjoy your rides!
Resolved Questions