Cycling Questions and Answers
Need assembly instructions for rickshaw?
Answers:
You posted this in the cycling forum.
That means that you've got a modern form of rickshaw, such as this:
http://en.wikipedia.org/wiki/cycle_ricks...
The forum for support and possibility for getting the instruction manual is here:
http://rickshawforum.com/forums/...
While the ancient rickshaw is illegal for street use, the cycle rickshaw is allowed on most non-congested streets. Check with local laws before investing in this vehicle.
There are two forms. As seen overseas, it is the tricycle with one wheel on back and two on front. There are similar cargo hauler bicycles with a box on front.
Assembly does not differ from basic bicycle assembly, so that, I'm assuming, is not your question. If it was, see the library for info or the bike store for help.
The other form, usually seen here in the United States involves pulling the ancient style rickshaw with a regular bicycle instead of person running on foot.
This is installed exactly like a child transporter trailer (which is a rickshaw) or a bicycle cargo trailer.
Now, here could be the question.
I hope you mean "How do you pull it?" otherwise it was a question of basic assembly needing only a very few hand tools and about an hour's spare time. In that case, see the library (info) or bicycle shop.
How do you pull the adult size cycle trailer (rickshaw)?
That uses a 26 inch wheeled or 24 inch wheeled economy grade "Mountain Comfort Hybrid" class bicycle that has the 3 following changes:
1) Shimano Mega-Range rear drive with 11-34 (8 cogs preferred, but 7 can work). This is very inexpensive and quite strong. The bike may already come with this option.
2) Mountain technical crankset of 22-32-44, which is the smallest size of normal mountain bike crankset, and it just bolts right on. The bike may already come with this option.
3) Next, the rear wheel has all of the spokes set to a high tension so that it won't break down. A "Tandem Rated" rear wheel is also an option. See the bike store for details.
*Yes, the maximum low gearing possible is required, and so is a rather upright riding position because leverage is paramount.
The rickshaw is then attached with a bike trailer towing kit. See the bike store for options.
This will be able to transport 1 rider and 1 passenger up steep hills OR 1 rider and 2 passengers on moderate terrain.
In developed countries, the rickshaw is used for amusement or to transport children.
That's because its range with adult passengers is limited to about 15 slow miles per shift.
One may wish to consider an electronic cycle motor and a generous supply of batteries for ranges exceeding 15 miles.
However, to transport adult passengers in this manner, we would normally use the common electronic golf cart.
See also Xtracycle and their method of attaching cargo to a regular bicycle. Notice how their cargo unit replaces the rear wheel of a bicycle. Given a steel bicycle and a bit of welding, a two wheeled cargo unit with a bench for two people could be installed in the same manner. This is the "new style" IMPRA as seen in India, and it has greater range. It was never widely developed because of local laws that favor a more technological appearance for cities.
What are some honest stores to buy a adult/teen size bike??
Question:like the ones that are i cogitate, 27 inches [the wheel], so im guessing those are adult sized, and at accurate prices.?
Answers:
No no noooo do not buy from a store. Store bikes are toys with unreliable, cheap, parts that usually will break.
Adult bike's for a mountain bike own 26inch tires. Roadie bikes are around 29inches.
Again I highly reccomend you dance to a bike shop and purchase an affordable bike there. They general public working there will hold much more knowledge give or take a few the bikes.
If you must buy from a store I reccomend you to check out REI. =)
Also the bikes on the wall-mart page are risky. It's not great to buy a full suspension bike under 800, and rather $1000, for something worth quality.
The store bikes are insanly cumbersome. One bike, full suspension I saw on wal-mart was 43 pounds. That is roughly the weight of a $3000 downhill bike.
Check out the Trek 820. It comes surrounded by a variety of sizes also.
Walmart have awesome bikes!
And I know you know Walmart has great prices on only about everything...
Here:
http://www.walmart.com/catalog/catalog.g...
Walmart, Sport Mart, Costco, Sport Chek
never buy any bike from Walmart, Kmart, Sears, Target, etc.
step to your local bike shop and look around
check out KHS, Trek, Giant, and Specialized
plan on spending at least 400 to 600 bucks for part and durability
you will be glad you did
What size bike should I acquire if I'm 5'9?
Question:And want a comfortable ride. Not too tall. Not too short. How frequent cm? Looking for a mountain bike or a road bike. Thanks.
Answers:
Different makes own different sizes that will fit you differently. Im about 6 ft and I a enjoy large scott YZ0 dirt jersey. you will probably want a larger size bike you might hit your knee on the bar if you are turning sharply on a smaller one and that hurts a lot.
a mountain bike
For your plane, get something next to 24 inch wheels and adjust the form to your comfort level. Your form should be adjusted so that when the pedal is at the bottom, your knees is slightly bent...not locked out. Hope this info helps
I am 5'9" and a inseam of 32", I ride a 56cm KHS Flite 2000
road bike and a Med.(M) contained by a KHS XC904r mountian bike.
not all make will fit you the same...
I'm 5-7 and my road bike is a 54cm and my mountain bike is a small. Standover elevation is the first thing to consider when getting a bike--at tiniest an inch on a road bike and three inches on a mountain bike.
But there are greatly of other things to consider when sizing a bike. Go to a good bike shop and try a couple of different sizes out. Bikes surrounded by toy and department stores are "one size fits all" or advertize by wheel size. Not righteous.
It all depends on the type of riding your going to be doing and the type of bike. Different brand name very on their size depending on their frame style. Example. I have an 04 Kona Stinky which was a 17" frame (medium) next I bought a 06 Kona Stinky and they changed some of the frame design and that frame is 15.5" frame still a medium.
Your best bet would be to stir to your local LBS and have them weigh you up for the type of bike you want.
Good Luck with it!
The correct answer is to shift to a reputable bike shop in your nouns and have them benchmark you. From there you will know how to determine what size bicycle will fit you best. There is no recipe for bike fit because all manufacturer are different.
The best article I know of that deals beside overall bicycle fit and comfort is on Rivendell's web site at http://www.rivendellbicycles.com/html/bi...
Rivendell are the masters of bicycle comfort for everyone who doesn't see.
I am also 5'9" and we could ride completely different bikes depending on our individual builds.
Get thee to a bicycle shop. Get fitted. Ride safe!
Bianchi Reparto Corrsa SL right crank -carbon bran is it worth it?
Question:Hi
I've broke my carbon fibre right paw crank near the pedal. Is it really worth replacing beside something that can't take every daytime wear and tear. And can anyone recommend a upright value supplier for a replacement- metal or carbon cellulose. (I don't want anythning a lot heavier). Thanks for looking.
Answers:
Due to the repeatedly restrictive blend of technology onboard the Bianchi road bikes, without knowing more specific information, the following is the resulting answer:
For bikes that use a compact double of 34-50, replace the carbon fiber crankset beside the exact same brand of alloy crankset. This will present the value of not have to purchase an additional bottom bracket, and it will instantly restore expected enactment to the bike.
For instance, Bianchi's love of the FSA Carbon crankset with ISIS spline bottom bracket can also fit the FSA aluminum crankset next to ISIS spline
For bikes that use a Shimano drivetrain and a Road Triple, Nashbar has a nice black Shimano 105 9 speed model on public sale that will connect to your existing Octalink 1 bottom bracket.
Once again, back on the Compact Double, Shimano R700 34-50 is compatible next to Campy 10 speed drivetrains, not 9 speed drivetrains, and the bottom bracket is built in to the R700, an excellent pro and feathery hurricane lantern weight.
If you've get Campy Carbon, just pop an the same all-alloy model right in its place.
Most all-alloy models that are heavier ensue to have steel chainring bolts. You can probably recycle your existing chainring bolts to breed up that minor difference. FSA and Truvative chainring bolts are available aftermarket.
Most all-alloy models that are lighter than yours happen to enjoy an integrated bottom bracket, such as the 2007 Shimano lineup that all requires a 9 or 10 speed Shimano fasten or a 10 speed Campy chain. So that won't fit a 9 speed Campy.
Here's a almanac of most known road cranksets.
Find yours on the record and note what sort of bottom bracket it uses (interface).
Now, use the search out tool to look up all that will fit.
http://aebike.com/page.cfm?pageid=30&achievement...
*Try to get at smallest as low of a gear as you have immediately and at least as high-ranking of a gear that you have presently.
EDIT: I just found out that it is possible to apply the FC-R700 that troop Discovery rode on Stage 17 of the TDF, to the 9 speed Wipperman (Campy) chain by adding together special paper delicate metal spacers underneath the inner chainring.
One set spreads the crankset for 9 speed use, while two sets of spacers spreads the crankset for 8 speed use. I've no idea where on earth to buy those spacers, but my guess is harriscyclery.com
This crankset is normally mate with a 12-27 reverse drive that does not contain any weak titanium.
If you want a durable featherweight compact double, the FC-R700 is the hugely finest.
*It also occurs to me that immediately is your opportunity to adjust the crankarm length to fit your own body. Since I wear size 32" inseam pants, 175mm cranks are for me. I'm 5'11" elevated and almost always enjoy to buy a new crankset for respectively bike I have anyway. Since I catch to choose, they are now adjectives Ultegra level (or similar) alloy for spike weight and extreme strength.
Bianchi should warranty that,try to bring a free one first
Well for starters, Bianchi probably won't warranty it but it is worth a shot. You may get lucky or told to contact whoever in truth made the crank. Whoever made the crank will probably want to see the crank so ya gotta send it to them. You'll probably hold to buy a crank set to get the right side as usually simply the left side is offered as a replacement (alloy, not carbon fiber).
Resolved Questions