Cycling Questions and Answers
What nature of bike should i catch?
Question:i am just starting to try cycling. what humane of bike should i get. something to ride doing a tour and pathways.no rough riding.what brand? how much would it cost me?
Answers:
15 speed mountain bike from Walmart for $53.73
http://www.walmart.com/catalog/product.d...
The "Easy Seat" bicycle form, it may look a bit odd but it is more comfortable than a traditional bicycle form.
You should be able to read just about if you do a search on any turn out engine
I bought mine at:
http://www.heartlandamerica.com...
http://www.heartlandamerica.com/browse/i...
.
Any muddy fox bike is well worth the money
Go to your local bike shops and compare brands and prices. For your chief "comfort" bike or cruiser, expect to spend 200 to 300 to start. Don't forget to buy a helmet (which will cost you anywhere from 30 to 100.
The choice of a bicycle isn't just finding one you similar to and start riding it. A bicycle that doesn't fit you and your needs can engender cycling a miserable experience.
Go to good bike shops and evaluate them. Not the bikes but the shops and the force.
When you decide on a shop you close to then agree to them help fit you to a bicycle that will fit you and your entail.
Many areas go into the proper fitting of a bicycle. Height of the form, Handle bars, size of bicycle etc.
You will also own the maintenance available to you. Bicycles close to any other vehicle needs to be maintain.
Have a good cycling experience.
As I strange cyclist, I would recommend that you look for a "hybrid" bike. It is a cross between a road and mountain bike but with road tires. The ride is more adjectives which is more comfortable for you.
I would strongly suggest, as others before me, that you look in a local bike shop. They will provide you with great information and produce sure that you fit the bike you are purchasing. Being properly fit on your bike makes adjectives the difference. If the bike does not fit your body you will not be comfortable and you will not continue to ride the bike.
Additionally, lots shops will include 1-2 free tune-ups on your bike, which is an added cost savings. (Yes, your bike requires care, too.)
Good Luck and Happy Cycling!
I would recommend you buy a $50 bike from Walmart. If you prove to yourself to be a dedicated rider, afterwards you can buy a nice $500 bike. No sense buying a nice bike now since most those quit a hobby after they try it.
Go to your local bike shop, a good one will sustain you pick out a quality bike surrounded by your price range and your riding style. They will also fit you to the correct size bike which will receive you ride more enjoyable.
Stay away from the corporate monsters and remember,you bring what you pay for. Most local bike shops will enjoy prices ranging from 170.00 - 7000.00 or more.
I would look into buying a hybrid for the type of riding that you mentioned. But I would avoid buying one from Walmart. The bikes are not put together right most of the time and not to long ago I be reading a article about them possibly one sued for selling death trap bicycles.
Go to your local LBS and look at your option. You can probably get a clad hybrid for a few hundred.
Good luck on your search!
Is there a conversion table for bicycle wheel circumferences; ERTO to mm for example?
Answers:
The European Tyre and Rim Technical Organization spec is roughly the tire diameter minus twice the tire thickness, times 25.4 mm/inch. So a 16x1.75" tire comes out to a 317mm ETRTO number. This isn't always exact; you'll notice that some tires of the same size come out with different ETRTO numbers.
A conversion table of sorts is listed below as a link.
Tom
How do u put on an inertube on a bike?
Answers:
You don't put it ON the bike. You put it in the tire.
* STEP 1: Take a tentative tire and slip one edge of it adjectives the way around the rim. It should be possible to do this by mitt, although you can use one of the tire tools if necessary.
*
STEP 2: Place the inner tube completely inside the unmarked tire, taking care to procession up the inner tube valve near the valve hole contained by the rim (see B). Push the tube as far into the tire as possible. It might help to inflate the tube fundamentally slightly.
* STEP 3: Using your hands, push as much of the second farthest point of the tire onto the rim as possible. Continue pushing the tube into the tire as needed.
* STEP 4: Insert a tire tool between the rim and the portion of the tire that is not nonetheless installed.
* STEP 5: Slowly lever the tool upward and force the tire over the rim edge. Use a second tool to push the tube into place if mandatory.
* STEP 6: Gently roll the tire into place over the rim edge. Work slowly and avoid snapping the tire into place as this tend to pinch the tube and cause nouns leaks.
* STEP 7: Inflate the tire to the recommended pressure written on the side of the tire, and replace the tiller on the bike.
step 1 deflate tire
step 2 put a little dish soap around the tire
step 3 hold a screw driver ( flat head ) and pry one side of the tire out (one side only) and away from the rim
step 4 verbs old tube out
step 5 stuff latest tube in, be sure to align spigot stem up with the hole
step 6 clamp spigot stem with a set of two of vice grips ( don't clamp too tight because you will smash the valve stem)
step 7 bear the flat head screwdriver and pry the tire hindmost on to the rim ( be sure not to get too close to the inner tube because you will put a hole within it)
step 8 inflate tire to specified air pressure ( do not over inflate or the inner tube will explode.
be sure that an fully developed helps you. enjoy fun and ride safe
If adjectives else fails. follow the directions.
Do not use tools to put contained by a new tube. Put one side of the tire on the rim. Inflate the unsullied tube until it is just round, (very earth-shattering prevents pinches). Place tube inside tire putting the valve stem within the hole first. Work the other side of the tire onto the rim using both thumbs to press the bead over the rim. When inflating be sure to check that the bead is seated properly on the rim
Which part is the "hub" on the cycleops powertap system?
Answers:
The "hub" on any wheel is where the spokes meet the center of the wheel. The skewer goes through it and acts as the axle to attach to the fork. Cycleops replaces the hub with their own hub which sends info/data to the computer.
Resolved Questions