Cycling Questions and Answers
My bike desires a 26 x 1.9 - 2.20 tube but I own a 26 x 1.50 - 1.85 tube?
Question:It seems to fit but I haven't tried to nouns it up. I got the tubes free but don't know what will develop if I use them.
Answers:
I'm a bike mechanic and it will work fine. If it was a bigger gamut then it would be more of a problem due to the reality that you would have a bunch of extra tube limp out and there would be a bigger accident for a pinch.
How FAT is your girlfriend , i am worried for tube :)
Ask your bike dealer beforehand doing it
If I was on the trail near a flat 26 X 2.3 tire and somebody gave me the small tube I wouldn't dawdle to install it and inflate it.
Nothing bad will come about if you inflate the tire. You'd be surprised how large you can blow up the tubes past they explode.I'm talking close to a good 5" diameter. I envision that over time the tube won't last as long as it is anyone stretched further than it was designed.
It is close adequate to the 1.9 that it will work fine.
I even hear of people riding 29" wheel using 26" tubes.
It should work just fine. I've have 700 x 23 tubes work in a 700 x 32 tire beside no problem.
Yes it will work just fine.
It'll work, and even be lighter. But the rubber will be stretched somewhat thinner than normal inside the tire and be smaller number resistant to flats. That's it.
you can use that tube for that tire, it just stretches the rubber farther to compensate for the increased tire size. it wouldnt be a well-mannered ides to use it for a long period of time, but if its a impermanent fix, then you'll be only fine.
a new tube costs $5, would you be predisposed to spare that much to make sure you dont enjoy an accident on the trail?
I am looking to buy an entry rank track bike surrounded by australia, any suggestions?
Question:G'day, I have purely had my first turn at the velodrome and would like to buy a moral entry level bike. I'm 180 cm and weigh mid 60 kgs. Anybody get any suggestions of a good bike to buy or a suitable shop in south east australia?
Answers:
Yeah Mate
If you contact you state's (or territory's) cycling body they will put you within contact with your nearest track orientated club. You will attain more, and better, leads from them next anywhere else.
As far as bikes go most meander up, either converting a roadie or building one up from a frame. (it's relatively cheap no groupset)But win in contact beside your nearest club first. There should be a few used ones floating around. (don't see many worn out) . You will carry a much better bike for you money. (Try to get a hole bunch of chainwheels and sprockets while your at it.)
the Bianchi Pista and Specialized Langster are perfect entry level track bikes (and they can other be upgraded later to better cranks, wheelsets, etc.)
I call for a trainer for my bike, any suggestions?
Question:I need an indoor trainer for my bike, since it's a bit too blowing hard to ride outside right now. What are some right brands, and price ranges? Would purchasing one on eBay be safe, or should I buy one from a bike store? Any relieve is greatly appreciated.
Answers:
Magura, Minoura, cyclops, elite, etc...check the net for deals. I don't see a problem beside buying used one on ebay. Just make sure the shipping charged isn't fixed and the retailer has a well brought-up rep. I would buy a new one from a network retailer or a local bike shop. That way, if something is wrong next to it, you can take/send it back.
Also, don't be afraid to spend a few bucks and grasp a good one. It will end for decades, so spending an extra 50-100$ works out to less than 5$ per year. I bought a minoura mag trainer within 1993 and it still works great. I use it 3 times a week in the cold weather and give somebody a lift it to races to thaw out up on.
Magnetic loaders (called mag trainers) are probably the best bang for the buck. They're cheaper than fluid trainers and quieter than entwine trainers
Wind trainers have a aficionado that spins and creates resistance: pros - more 'real' loading simulation, cheaper
cons - noisy. not a short time ago a little vociferous. the fan get so loud you can't talk, listen to TV or hear music unless you're wearing receiver. If you have a significant other contained by the house, they will hate you for buying it.
Fluid trainers enjoy an oil contained by a chamber that creates resistance
pros - same 'real' loading as wind loaders, massively quiet
cons - more expensive
The 'real' loading is that it simulates the non-linear resistence of riding doing a tour. The mag loaders have linear resistance. What this system is that with a mag loader, if you want to progress twice as 'fast', you put in twice the power. With a twirl or fluid trainer, if you want to go twice a 'fast' you call for to put in the _square_ of the power. Trust me when I relate you that a mag loader on the highest setting and the bike surrounded by the hardest gear ione HELLUVA workout. The types that hook up to a computer like the Computrainer are mag loaders, but they are electronically controlled so that the loading is non- linear. These are _very_ expensive.
Get one that have a resistance control you can mount on your handlebar. That way you don't enjoy to get stale the bike to vary your workouts.
There are several different kind of indoor trainers. Some work on wind resistance, some are captivating and some are fluid resistance. I have one that works on centrifugal force. Check it out at 1upUSA.com.
The other kind you can check out at performancebike.com, nashbar.com or universalcycles.com. Any good bike shop contained by your area might own a few in stock they can show you.
The prices will catalogue from $200 or so up to $500+. The real expensive ones can interface near your computer and simulate road riding. I would stay away from ebay, you'll only bring used stuff and because of the weight, anything you might save, you'll payment in shipping costs.
Look for a fluid resistance trainer, you don't hold to go top of the column, but you don't want to go bottom any.
Also look into picking up a cheap rear joystick and cassette to swap out when you use your trainer. Otherwise you will burn through good tires close to crazy
How do you feel about kona bikes. are the comparable to other major brands? light bike? strong bike?
Question:just shopping aroung still...
Answers:
Kona makes some really nice, strong bikes. ive never ridden one, but ive heard a lot of rave about them. most are on the expensive side, but they come with solid parts that wont let you down like a schwinn bike will.
try www.mtbr.com and read the reviews for the bike you are looking at. it doesnt matter what the manufacturer says, input from other riders is more reliable!
Resolved Questions