Outdoor Recreation Questions and Answers
Where can I find indisputable dutiful boning and skinning knife for processing deer?
Question:I am looking for a good cut to use for processing wild hobby such as deer, bear and other animals
Answers:
I will narrate you..your can spend a lot of money on fancy knife and such.I have used several kind of knives...and the easiest one to use that I own found is a 15 dollar fillet pierce I got at wal-mart surrounded by the fishing section..I use my larger hunting blade to help quater and skin but that prepare knife is the best for boning and adjectives up the meat..at least for me.
A.G. Russel ....
I would seriously look into Hinckle or Wusthof. I use a 12 inch Hinckle boning blade for shark, pompano and such. They can take a solid beating!
sporting commodities store or walmart
Cabellas
try gerber knives they get all kind and they are very moral quality
try cabella's. gerber knife are excellent and fairly priced. a.g. russell's are great, too. check out the alaskan guide series knife at cabellas.
I agree with Yetti, I own several Hinkle's that I paid big bucks for but more regularly than not I use a good characteristic fillet blade.
Puma makes the best stick I've ever used. They keep an fold for a long time. I processed 2 quartered elk contained by a few hours with one and only that knife, and never have to resharpen it. But they've gone up quite a bit contained by price over the past few years. Now, the guilty pleasure pierce... I got a $15 cut at Wal-Mart last year that be by "Mossy Oak". Really the only object I got it be I thought the Mossy Oak logo cut-out in the blade be cool... but it's my 2nd favorite. Don't know if they have them this year, but for a cheap-o, it's markedly done a good errand.
Where can I find cheap 30 - 30 rifle ammo?
Question:I have a Marlin 336C chambered surrounded by 30-30. I currently buy ammo from the local Dicks Sporting Goods, but I am looking for someplace cheaper. I live in Ohio and dont know the shipping regulations for Ohio so if you appear to know these let me know around these.
Answers:
If you're not into reloading - which would be my first choice - then check out the three sites below for inexpensive .30-30 ammo.
No time close to the present to start reloading, cost me around 12-18 dollars (Depending on the type of bullet used) per 100.
As to loaded ammo check out cheaper than dirt, for prices on line, they should also hold info on shipping to your state.
ammo-cnnection.com
ammoman.com
walmart
I entail info please?
Question:i just get a gun at an auction. and i was wondering how much it is worth? it's a hamilton rifle number 27, 22 short, it be made in 1907. can anyone lend a hand?
Answers:
Whatever you do, don't put any modern, "high speed" or "Hi-Speed" cartridges surrounded by that old rifle.
Most of today's .22 rimfire cartridges generate better pressures than the cartridges made before the 1930s, when the superior velocity .22 rimfire was introduced.
If you must shoot it, use standard velocity ammo. This is most commonly encountered as target ammo, but I believe that CCI still make the .22 Short in standard velocity.
And avoid the bribery to have it rechambered to .22 Long Rifle. Not merely would it be straining the action, but few population realize that .22 Short barrels are almost always a slower rate of rifling than similar barrels made for the .22 Long Rifle.
The result of rechambering a .22 Short barrel to .22 Long Rifle is usually lousy correctness. The slower rifling rate of the .22 Short barrel won't stabilize the longer and heavier .22 Long Rifle bullet incredibly well.
Get that rifle checked by a gunsmith previously you fire it. The Hamilton was a cheap rifle surrounded by its day and may not own withstood the decades well --- especially if someone beforehand you was shooting high-speed ammo surrounded by it.
Now, as to value:
The 2006 Standard Catalog of Firearms list the Hamilton Model 27 (p. 537):
The Model 27 is described as a single-shot, tip-up .22-caliber rifle with a stamped steel heir. Barrel length is 16 inches and brass-lined, or 14-7/8 inches. Overall length is 30 inches. It was first produced contained by 1906.
Very good condition - $300
Good - $200
Fair - $150
Poor - $100
The Hamilton be a cheap rifle in its hours of daylight but very popular. Few of them survived contained by decent condition. Most be used until they wore out, or were used to the point of misuse and junked out.
They are not specially popular as collectibles but I believe their value will rise surrounded by the years ahead.
If you have one within exceptionally good condition, I'd consider limp onto it as an investment. If it has deeply of wear, little bluing left and dings surrounded by the stock, it will never bring much money.
These are neat little rifles, made chiefly for boys who hunted or lived on farm. They taught like mad of youngsters how to shoot --- and those youngsters later displayed their marksmanship ability at Iwo Jima, Normandy, the Battle of the Bulge, North Africa and Sicily.
Cheap .22 rifles like the Hamilton introduced closely of kids to gun safety, hunting nouns and marksmanship.
Condition?
Take it to a dealer.
try and give the name a antique dealer that handle guns they should be able to relief you.
cabella's gun library appraises, buys and sells. they are honest. try them.
turn to a antique dealer
Recommendations for a Handgun?
Question:What kind of handgun do you recommend for a trainee, I want it to practice and self defense, I am looking into becoming a correctional officer.
Answers:
I always recommend a revolver for clean handgun shooters. The action is simple, reliable and undisruptive, the maintanence is simple, and they're accurate enough to build a fair-minded level of skill.
Look at a .357 Magnum revolver. As you've already be told you can practice with .38 Special ammo to collect some money (and noise and wince, as well.). A 2" gun is easier to conceal, but smaller amount accurate, so go to a 4" vat and you'll be have a gun you can hang on to and use for years.
Good Luck!
I usually recommend that beginners start with a fitting quality revolver surrounded by .357 Magnum caliber. This will allow you to practice with 38 special ammunition, smaller number expensive and lower recoil.
If you really cogitate you must go near a semi-auto then look at a wearing clothes 9mm pistol (Sig, Glock, Beretta etc...)
Try a 9mm pistol. Most police use 9mm because it has smaller quantity recoil. 9mm is ample to drop someone with minimal back off. If you want one just for target practice try a .22 cal pistol. they're alot cheaper, really accurate, but they're crappy if you hold someone running after you.
The recommendation for the .357 revolver is right on. Also, a angelic 9mm is a great first semi-auto pistol, as it's easy to shoot and cheap to shoot too.
Try a Glock 17 or Glock 19. They are 9mm, an acceptible caliber for defense, while inexpensive to shoot and low on withdrawal. They're both relatively inexpensive for automatic pistols while being elevated quality and reliable.
Because you are going to try to become a corrections officer, I would find out what the most adjectives sidearm used happens to be. In Ohio, the S&W model 10 .38SPL near lead round snout ammo was remarkably common for decades (even up to the 90s-but I am not so sure now). Aside from that, if you enjoy never fired a weapon I would get a 4" barreled .22 auto unless you enjoy practiced with one of those previously. If you go through training you will be treated a moment ago like evryone else-even if you enjoy plenty of experience with centerfire. Do things right and don't "soar the gun" and get something that is to say more for your personal liking than what is required.
As a beginner's handgun? Go for a .22, nought recoil, cheap ammo. Ruger and S&W form some nice target pistols.
I say the .22 for a learner because learning proper trigger verbs and sight alignment are infinantly more influential than any other factor. Once you learn those 2 skills, overcoming shrink away is a walk within the park.
i reccomend getting a semi automatic.like a 9mm or a .40 or a .45..this is probably what you would get as an officer.
I would recommend a .357 magnum. You can shoot .38 specials out of it for target practice and the .357 magnum rounds for defense, hunting, or use in the woods.
However, most corrections officer or police officers use the 9mm or .40S&W.
I suggest getting a Glock, the most adjectives police weapon. I have a Glock model 23. It is a .40 S&W. I salaried $479 + tax. You can buy a .357 Sig container for $100 and drop it right in. Use like peas in a pod mags, springs, etc. just alter barrels. It's like have 2 guns for about $600. The 9mm is cheaper to shoot, but plentiful police now fetch the .40.
The Glock has no instruction book safety. The sanctuary is in the trigger. This is a problem for some beginners and various who prefer a manual sanctuary. If that's you, the you can consider a Beretta.
The cheapest, yet reliable gun is the Ruger P series. My relatives has a p89 9mm. It's built approaching a tank, but is a great gun and highly reliable.
Since you're considering becoming a correctional officer I'm going to recommend the .9mm rather than the .357 Magnum because the world of decree enforcement has gone almost completely over to the auto-loader. Specifically I am going to recommend the Glock Model 19 .9mm next to night sights and glorious capacity magazine. For defensive purposes select a ability defensive .9mm ammo. For practice win the bargain 115 small piece ball ammo.
The Model 19 is severely user-friendly and rookie officers (male & female) who own failed to qualify beside other guns have switched to the Model 19 and qualified right away. Take your gun safekeeping course and comply with your State's military capability laws.
Good luck and best.
H
For a student gun I would highly recommend the Ruger contained by 9 mm. Very cheap ammo. Indestructable gun that will get you used to the heft of a sidearm. Very inexpensive weapon. No equal for the price.
Well everything considered, you should look at a apt Smith and Wesson, Taurus, or Ruger revolver, Caliber 357/38. If you want an auto, go near a Glock or Springfield Armory XD in a 9mm or 40 cal. Ok, why as for the revolvers. 1)They are reliable and collectively more accurate 2) More affordable 3)Good beginners handgun 4) Most DOC's because of budget restraints still use revolvers 5) Easier to find one that is more accommodating to a females foot. Why on the auto brands reccommended, Glock or Springfield Armory. 1)Reliable for an auto 2)Affordable compared to other autos 3) Compared to other autos better grips for female hand 4) More likely due to cost to be adapted by DOC's as they travel to autos 5) Low maintenance compared to other autos 6)Good customer service 7)Lightest freight auto's on the market. Between the 2 auto's I prefer the Springfield Armory XD. It only feels better contained by the hand, have 3 safety's built in, and the mags are better made. It shoots purely as well. Price is comparable. Hope this help, good luck and honourable shooting. Remember safety and practice.
The one and solely way to step is the 357Magnum. However I recommend you purchase a 22 caliber first and practice with it beforehand you go into the 357 magnum...>>Remember you hold to crawl before you can wander.
Glock and Beretta offer excellent mitt guns. But beware of the grips of the large frame Glocks within 10mm and 45 ACP. They are great guns, but a little big for some hand. The Beretta 92 FS is also a big gun for a 9mm, and the grip may be a little significant. Beretta does, however, offer slimmed grips (I feel they reduce the "hump" on the put a bet on of the grip).
Should you get a revolver or a .22 LR as your first handgun? I don't mull over it really matters. Revolvers and .22s are great guns to own whether you are a beginner or expert. I guess it comes down to money for me. If you can afford buying multiple handgun, then travel for it and buy the .357 mag or .22 first, then agree on on the Glock or Beretta, or better yet, buy both the Glock and Beretta. If money is an issue, after go straight to your preferred defense gun.
I recommend a honest .357 revolver because you have the potential to practice using 38 special ammo. Also a revolver is more reliable because it is not as easy to preserve. Semi-Auto handguns contained by the hands of someone who is drastically new to it can preserve because the person does not know how to perfectionism for it or how to shoot it properly. If you really want a good semi-auto pistol I recommend choosing a reputable brand i.e. Beretta, Glock, Springfield Armory, Kimber, etc. Go to a shooting array that allows you to rent guns and rent a few different ones in 9 mm, .40 S&W, or .45 ACP and see what you prefer and what you are most comfortable next to. Personally I like my Kimber TLE the best. It is reliable and it shoots 45ACP ammo, a guaranteed man stopper. A gun is solely as good as the party using it.
go to a inventory and rent a few to try out.
my favorites are H&K usps easy to shoot verbs and maintan not always cheap to purchase i put over 10k threw my usp 9mm beside out a probem
Resolved Questions